INSTALLATION (C)
FOR POOLS WITH WALL VACUUM FITTINGS
1. Fill the hose with water by placing the end over a return jet inlet.
IMPORTANT
Your hose is now free of air. Please ensure that the hose ends are kept under water while performing the following steps. This will prevent air from entering your system.
2. Insert the male end of the hose into the large end of the 45˚ elbow. Then insert the small end of the 45˚ elbow into the universal valve cuff.
3. Insert the universal valve cuff into the wall vacuum fitting. The 45˚ elbow should be angled toward the surface.
MALE END | 45˚ ELBOW | UNIVERSAL |
OF HOSE |
| VALVE CUFF |
IMPORTANT: To help prevent suction entrapment accidents, wall vacuum fittings should have a safety vac lock installed. Contact your builder or retail pool professional for details.
12
