Data Capture for Workforce in Motion
1.8.2.Data Prefix/Suffix
You can add a data prefix and/or suffix (strings of more than 32 characters will not be accepted) to every barcode sent to the host device.
There is no data prefix or suffix in default settings.
Enable data prefix
Disable data prefix (*)
Enable data suffix
Disable data suffix (*)
If enabled, a data prefix/suffix can be set as following:
Start
Read « « set prefix (suffix) » barcode
Read intermediary label corresponding to the next character to set for the prefix (suffix)
(see appendix 1)
NO
Finished ?
YES
Read « end of config » barcode
End
Procedure to define Data/Barcode Prefix/Suffix
RoadRunners Evolution | - 20 - |
