ForteTM Manual
10
Setting the Macro and Micro Adjustment
The FortéTM must be running when
grind adjustment are made.
Micro
Adjustment
A-Z
Macro
Adjustment
1-10
Partially ground coffee beans may
remain between the burrs when the
grinder is turned off. When making
ANY grind adjustment, the grinder
must be running.
Normal Grinding Operation
Move the Macro lever (right side) up or
down, to the desired grind setting. Set
the Micro adjustment lever (left side)
to the middle of the scale.
Starting brew settings can be found at
www.baratza.com under the Support
tab.
Grind a small amount of coffee into the bin by pressing WEIGHT, then M (manual),
and then the START button. Press STOP after 5g of coffee have been ground.
Check the particle size. If the particle size is close to what you desire, use the
Micro lever to ne-tune the grind size. If the particle size needs a big change,
then adjust the Macro lever to a new position.
The full range on the Micro scale is equal to one “click” or position change on
the Macro scale. Adjusting levers UP produces a smaller particle size, adjusting
levers DOWN produces a larger particle size.