Playback Mode
Playback Mode
Playing Back a Tape
The recorded scene can be played back immediately after the recording.
1 Set the [OFF/ON] Switch 42 to [ON].
• The [POWER] Lamp 39 lights up.
42
39
2 Set the Mode Dial 38 to Tape Playback
Mode.
38 
3 Press the [◄◄] Button 17 to rewind the tape.
17
•Rewind the tape to the point where you want to start playback.
•When the tape reaches the beginning, rewinding stops automatically.
4 Press the [►] Button 15 to start playback.
•The [ 
] Indication appears. 15
•If a cassette recorded with copyright protection signal is played back, the picture is distorted by
To Stop Playback
Press the [ ■ ] Button 16 .
Adjusting the Sound Volume
To adjust the volume, push the [W/T] Lever 26 to display the [VOLUME] Indication. Push the [W/T] Lever towards [T] to increase the volume or push the [W/T] Lever towards [W] to decrease the volume. The [VOLUME] indication disappears immediately after adjustment is made.
26
To adjust the volume with the Remote Control, press the [T] or [W] Button to display the [VOLUME] Indication. Press the [T] Button to increase the volume or press the [W] Button to decrease the volume. The [VOLUME] indication disappears immediately after adjustment is made.
•The sound volume cannot be adjusted using the Remote Control in Playback Zoom Mode. (pp. 35~36)
•For other notes concerning this item, see page 58.
Finding a Scene You Want to Play Back
Cue/Review Playback
17 
14
If the [►►] Button 14 or [◄◄] Button 17 is pressed during Playback, it turns to Cue Playback
Aor Review Playback B .
AB
•If the Button is held continuously, it turns to Cue Playback or Review Playback until you release it.
16
33
