Before Use
Quick Guide
1 Attach the Battery to the AC Adaptor and charge it.
•Before use, fully charge the Battery.
•Since the Battery will not be charged when the DC Cable is connected to the AC Adaptor, disconnect it from the AC Adaptor.
•The [POWER] Lamp and [CHARGE] Lamp light up, and charging starts.
•When the [CHARGE] Lamp goes off, charging is completed.
2 Attach the charged Battery to the Camcorder.
Inserting a Cassette
1 Slide the [OPEN/EJECT] Lever 1 toward the front and pull down to fully open the Cassette Compartment Cover.
•To protect the tape, if the cover is not fully opened, the cassette holder cannot be ejected.
2 Insert a Cassette.
1
3 Close the Cassette Holder by pressing the [PUSH] mark 2 .
4 Close the Cassette Compartment Cover by pressing the mark 3 .
2 
3
Inserting a Card
1 Place your Thumb on the [OPEN▼] 1 Knob and pull the LCD Monitor 2 out in the direction of the arrow.
2
1
2 Slide the [OPEN] Lever 3 to open the Card Slot Cover 4 .
3 While holding the Memory Card with its cut corner facing right 5 insert it into the Card Slot 6 .
4 Close the Card Slot Cover 4 securely.
3
4
6
5
Using the Viewfinder
Before using the Viewfinder, adjust the field of view so that the displays inside the Viewfinder become clear and easy to read.
1 Pull the Viewfinder.
2 Adjust by turning the Eyepiece Corrector Knob 1 .
1
8 | For assistance, please call : |
|
