With a PC
•A message indicating a conflict between versions may be displayed during the installation. This will not cause a problem. Simply click [Yes] to proceed with the installation.
Windows 98SE Users
The following messages may be displayed when connecting this Camcorder and your personal computer via USB Cable.
1)The message “MTDV98M3.pdr is not found” is displayed.
•Enter “C:\Windows\system\IOSUBSYS”.
2)The message “MTDV98M3.sys is not found” is displayed.
•Enter “C:\Windows\SYSTEM32\DRIVERS”.
•You may click [Browse] to look for and assign the path.
Connecting the Personal Computer and
Camcorder
Please install the USB Driver first before connecting the Camcorder to your Personal Computer with the USB Cable.
Before making these connections, turn off all devices which are to be connected.
•When using the USB Cable, use of the AC Adaptor is recommended for the power supply of the Camcorder.
For Using Built-in SD Drive
By connecting the Camcorder and Personal Computer with the USB Cable, you can transfer still images saved on a Memory Card directly to your Personal Computer.
For Windows
1 Insert the Memory Card into the Camcorder.
2 Set the Camcorder to PC Mode.
3 Connect the Camcorder to your personal computer with USB Cable.
4 Open [My Computer] and click [Removable Disk] 1 (For Windows 98SE/Me/2000 users).
Click [Open folder to view files using Windows Explorer] 2 and then [OK] (For Windows XP users).
[Windows 98SE/Me/2000] | [Windows XP] |
1
2
•You can view images stored on the Memory Card and also save them to your hard disk.
•Please do not change file or folder names on the Personal Computer. The images on the Memory Card may not be able to be viewed on the Camcorder.
For Macintosh
1 Insert the Memory Card into the Camcorder.
2 Set the Camcorder to PC Mode.
3 Connect the Camcorder to your Macintosh with USB Cable.
4 Double click the “NO_NAME” icon.
•You can view images stored on the Memory Card and also save them to your hard disk.
•Please do not change file or folder names on the Personal Computer. The images on the Memory Card may not be able to be viewed on the Camcorder.
• It enters PC Connecting Mode.
45
