Operation
7.1.2.6Enter button (IR control)
ENTER
Pressing this button enables the user to select/activate the menu item when the OSD menu is activated.
7.1.2.7Standby button (IR control)
Pressing this button puts the display in standby mode.
Standby mode means that the power to the LCD panel and backlight is disabled and that all power consumption is reduced to a strict minimum. The display turns black.
To bring the unit out of this mode, press the button again. Power is restored immediately.
7.1.2.8Up/down buttons (IR control)
Pressing this buttons will navigate the “cursor” through the OSD menu when active or increase/decrease the selected value in the OSD.
7.1.3Indicators
7.1.3.1Location of the indicators
1 2
1IR receiver
2Power LED
Figure 9: Location of the indicators
Barco -