Operation
7.2.2Using the on screen display
7.2.2.1Overview of the key functions
Before depicting the OSD menus we will give an overview of the key functions.
Entering one of these menus via control panel?
•Press MENU , the OSD main menu appears on the screen.
•Press /+ or /- until the desired submenu is selected.
•Press ENTER to enter the desired submenu.
Quitting a menu?
•To quit a menu push MENU .
•Remark: MENU from the main menu closes the OSD.
Changing a value?
•Press /+ or /- to select the desired line.
•If the line displays a value that can be modified:
3Press ENTER and change the value with /+ or /- keys.
Executing a command?
•Go to the desired execute line.
•Press ENTER to execute the command.
Read-only text
•When a line is not selectable, this line is
Entering one of these menus via IR control?
The procedure for entering the menus via IR control is equal to the procedure for entering the menus via control panel.
The buttons used for the IR control are shown below, the left side shows the buttons of the control panel on the display, the right side shows the buttons of the IR control.
34 _______________________________________________________ Barco -