User manual MFGD 2320 23
MFGD 2320
MAIN MENU
Autoset
Video Contrast*
Video Brightness*
Luminance
Adjustments
Input Selection Auto
Settings
Scan Mode
Information
EXIT
* Not in DVI mode
2 Click the control wheel. The Scan Mode menu appears.
3 Turn the wheel to select the desired menu item.
4 Perform the settings as described below.

The Scan Mode menu contains the following items:

(Re)name ................ You can change the name of the scan in the
programmable memory location only. Turn the
control wheel to change the current character.
Click the wheel to move to the next character.
Reset Current Scan Click to disable the current scan mode. A dis-
abled mode is excluded from the Autoscan
system.
This may be necessary when the memory
contains several modes with equal timing
characteristics. In that case, the Autoscan
function will always switch to the first of these
modes in memory. So if you have another mode
with the same timing characteristics that you
wish the Autoscan to select, you will have to
disable the first mode.
3.10 Getting information
The Information menu allows you to get information about the display
and the connected signals.

To enter the Information menu:

1 In the main menu, turn the control wheel to select the Information
menu.