12. Display setup
There is a coarse and a fine adjustment of the position, use ENTER (when sliderbox is displayed) to switch
between the two.
12.8 OSD transparency
What can be done ?
TheOSD transparency function allows to make theon screen display (menu) transparent to preventa part of the image co ntent to
be hidden by the menu.
The level of transparency can be set from 0 to1 5.

How to set up the transparency level ?

1. Press MENU to activate the Toolbar
2. Press →to select the Display setup item
3. Press ↓to Pull down the Display setup menu
4. Use ↑or ↓to select OSD transparency (image 12-11)
5. Press ENTER
A dialogbox is displayed.
Usethe arrow keys or the input field to set the desired transparency.
Image12-11
12.9 AutoImage Setup
What can be done ?
Autoimageallows to detect automatically the character istics of the source (total pixels per line,...) and uses this information to adapt
the image to the LCD panels.
Autoimage can adapt the image based on following data :
• Totalpixels per line
• Start pixel
• Phase
• Contrast/brightness levels
110 R5976694 IQ PRO R500 01/02/2007