1. Installation process

Image1-1
2. Remove the lamp cover from the projector doing the following:
a) gently pull out the left bottom corner (A) of the lamp cover,
b) then gently pull out the left top corner (B) of the lamp cover,
c) then move the lamp cover away from the projector (C).
Image1-2
1.3 Removal of the lamp house
WARNING:Thisprocedure may only be performed by qualified technical service personnel.
CAUTION:Never attempt to disassemble thelam p from itshousing or to dispose of it. Return it to Barco.
Dueto its high internal pressure, the lampmay explode in either ho to r cold states if improperly handled.
Necessary tools
7mmflat screw driver.
How to remove the lamp house of the projector ?
1. Switch off the projector and unplug the power cord at the projector side.
2. Remove the lamp cover, see "Removal of the lamp cover", page 1 .
3. Release the three s pring lock screws of the lamp house as illustrated.
2R5976922 FLM LAMP HOUSE 18/11/2008