5. General device settings Touch panel
5.2 Add a custom logo in touch panel

About a custom logo

The touch panel software allows to place a custom logo on the upper left corner of the touch screen. The
software provides an area of 90 x 90 pixels. Any image larger than 90 x 90 pixels will be propo rtionally
scaled to match inside this area. The file m ust be a bitmap file (bmp, jpeg, jpg, png, ...).

Current active logo

Todisplay the curr ent active logo in DC Toolset,click on Reload .Thefileis downloaded from the touch
panel and a preview will be shown within the rectangular square.
Image 5-2
Reload current logo

How to add or change a logo

1. Click on Change... (a). (image 5-3)
The Change customer logo window opens (b).
2. Fill out the path and file name (c1) and click OK
Or,
click on Load (c2).
A browse window opens (d).
3. Browse to the desired file (e) and click Open (f).
A preview is shown in the Change customer logo window (g). (image 5-4)
4. If this is the file, click OK (h).
An upload question is displayed (i).
5. Click Yes to upload the image to the touch panel (j).
Whenth e upload is finished (k), an info window is displayed with the message : New logo is set in touch
panel”.
6. Click OK to continue (l).
44 R59770449 DC TOOLSET 15/12/2009