A. Recovery a projector with special plug-in
Image A-2
Createc onfiguration
Image A-3
Add digitalcinema projector
Image A-4
Startupdater
A.2 Recovery procedure

What should be done?

The recovery of the software is done in different steps:
1. Recovery of the main software called dp80.
2. Reboot of the projector.
3. Updating all other software with intermediate reboot if necessary.

CAUTION:Do not use the recovery code for a normal upgrade of a projector (normal

conditions) ! It may damage the projector.

Recovery of the main software

1. Before pressing Update now,pressALT+SHIFT+Tat the same tim e followed by 012(usualkey-
board, not numeric keyboard and without looking to the position of the digit on the button, upp er row or
lower row).
70 R59770449 DCTOOLSET 15/12/2009