4. Configurator
2. Open the device properties via right click and selecting Pr operties.
Or,
via click on ConfigurationonthemenuandselectingSelecteddevice →Properties (a).
Or,
by pressing Ctrl +Enter.
The Device dialog box opens (b).
3. Click on Connection (c).
The Connection tab opens (d).
4. Click on OK (e).
The device tries to make a connection and to retrieve data (f). When it is successful the pictograph
border becomes green, the properties are filled out. Whenit is not successful, the border stays gray
and a device not responding message is displayed.
Image 4-11
34 R59770449 DC TOOLSET 15/12/2009