c. Pass the Power cord and the other cables (if any) one by one.
d.Pass all the cables one by one from cable guide R 826745 and fix the cable guide on to the horizontal shift plate using 2 M3 Screws L.
L
The cable routing through IQ bar is complete. Adjust the approximate height of the IQ bar and also adjust the length of the cable required at the projector side.
5.Mount the Ceiling Bracket R 826748 on to the ceiling with standard M8 bolt not supplied with the Kit. For marking of the ceiling holes, refer the Installation manual of the Ceiling Mount of CV 120 (R5973715)
