Barco R 9849999 installation manual Necessary Tools, Centering the ceiling mount

Mounting the Assembly

Necessary Tools

1.Torx screw driver for M3 screw

2.Hexagonal driver (n° 6)

3.Ring spanner 12-13mm

4.Side spanner 12-13mm

5.Cross head screw driver for M8 screw

Centering the ceiling mount

Mark the position on the ceiling hole. Since the center of the lens does not coincide with the center of the projector, the center of the lens has been marked on the ceiling mount.

Remark

The horizontal shift of the ceiling mount allows to re-enter the projector later on, However, centering decently the base plate insures a good horizontal shift margin afterwards.