FIGURE 7
ELECTRIC HEAT CLEARANCE
Side section view of supply air duct for wall mounted unit showing 1/4 inch clearance to combustible surfaces.
WARNING
A minimum of 1/4 inch clearance must be maintained between the supply air duct and combustible materials. This is required for the first 3 feet of ducting.
It is important to insure that the 1/4 inch minimum spacing is maintained at all points.
Failure to do this could result in overheating the combustible material and may result in a fire causing damage, injury or death.
Manual | |
Page | 13 of 19 |
