Bard F1925 manual 2.2DRAIN PAN, 2.3INSULATION, 2.4MOUNTING BRACKETS, 2.5REFRIGERATION SYSTEM

2.2DRAIN PAN

Drain pan shall be constructed of 20-gauge galvanized steel, bonderized and finished with baked-on exterior polyester enamel paint.

2.3INSULATION

Insulation shall be foil faced for ease of cleaning.

2.4MOUNTING BRACKETS

Full-length side mounting brackets shall be an integral part of the cabinet.

2.5REFRIGERATION SYSTEM

All models shall use a high efficiency scroll or compressor. The compressor shall be covered by a 5-year parts warranty. The refrigeration circuit shall be equipped with factory installed high and low pressure controls and liquid line filter dryer. Compressor shall be mounted rubber grommets. Unit shall be provided with R-410A (HFC) non-ozone depleting refrigerant.

2.6CONDENSER FAN MOTOR

The condenser fan, motor and shroud shall be of slide out configuration for easy access.

2.7INDOOR BLOWER MOTOR

The indoor blower motor shall be high efficiency ECM motor providing low sound levels with soft start capability and high efficiency operation. Motor will automatically respond to higher static ducted applications without user adjustment or wiring changes.

2.8ELECTRICAL COMPONENTS

Electrical components are easily accessible for routine inspection and maintenance through front service panels. Circuit breaker is standard on all 208/230-volt models and rotary disconnect standard on all 460-volt models. Circuit breaker/rotary disconnect access is through lockable access panel.

Phase rotation protection and phase failure protection shall be standard factory installed features on all equipment with three-phase power. If unit is wired incorrectly phase monitor will lock out compressor operation and red warning light shall energize. Once power wiring is corrected at field power wiring location, a green light will energize on phase monitor. If a phase of power is lost, the phase monitor will also lock out.

F1925 (2010 08) Page 2 of 5