PERIODIC MAINTENANCE

Periodic maintenance must be conducted on your system to ensure maximum performance, especially during peak operating periods and conditions.

1.Keeping the air filters clean is a key element. These are user responsibilities, either all or at least in part, and if they cannot be fulfilled by the user, arrangements should be made with your Service Company.

2.There is a condensate drain system for all heat pumps, and this must be kept open and free to convey the condensate generated by the operation of the equipment to a suitable location, (typically an internal drain). Depending upon the specific installation, the user would at least be aware of the drain mechanism and know what to expect. If any questions, it should be reviewed and discussed with your installer and/or Service Company.

3.All heating and cooling systems should have periodic inspections made by a trained professional, who has the experience, knowledge, training, licensing, certifications, and the necessary tools and equipment required to do these tasks properly and in accordance with approved or mandated procedures.

4.The maintenance procedures and frequency of routine service can vary depending upon actual type of equipment in use, type of building or facility, and other factors that can impact how often a machine must be serviced.

5.Proper and routine maintenance and service will protect your investment and help extend the service life of the product, and also help ward off more extensive and expensive repairs.

6.An open loop or well supplied water system may require special review by your system installer. Check with installer for any special water system requirements.

HELPFUL HINTS AND

GOOD OPERATING PRACTICES

The following information will help you enjoy the full comfort and benefits of your Bard cooling and heating system, maximize the performance and efficiency, and help extend the life of your system:

1.Always keep the equipment in peak operating condition with routine scheduled maintenance, especially the air filters.

2.For most efficient operation, set the thermostat at the temperature you prefer, and then let it take control. If any changes to the settings are required, they should be made in small adjustments and the system be allowed time to respond. Rapid changes either up or down should not be done.

3.Setting the thermostat very high does not make the system heat faster, and setting it very low does not make it cool faster.

4.It is not recommended to turn the system “Off” and then back “On” when you need it. This can allow temperature and humidity to build up in warm weather conditions and force the system to run continuously to try and catch up. If the building is to be unoccupied for a lengthy period, it is best to adjust the thermostat to a reasonable higher (or lower depending upon the season) setting rather than turning it completely off. Upon return, the inside conditions will not be totally out of control, and recovery time to desired conditions would be much shorter.

5.Keep all supply registers open and all returns free and unrestricted. The heating and cooling system is designed to have a certain amount of airflow for proper operation. Therefore, closing off registers, in unused rooms as an example, could reduce airflow below acceptable levels and should not be done without review by your Service Company who can access the overall situation and advise you accordingly.

Manual

2100-520

Page

6 of 7

Page 5 Page 7
Page 6
Image 6
Bard GVDM-26 manual Periodic Maintenance, Helpful Hints Good Operating Practices
Page 5 Page 7

GVDM-26 specifications

Bard GVDM-26 is an innovative and advanced robotic system designed for a variety of industrial applications. It is renowned for its versatility and efficiency, making it a popular choice across different sectors, including manufacturing, logistics, and warehousing.

One of the standout features of the Bard GVDM-26 is its robust construction. Built with high-quality materials, it is capable of withstanding heavy usage and harsh environments. This durability ensures that the GVDM-26 can operate effectively in demanding settings, reducing maintenance downtime and increasing productivity.

The GVDM-26 is equipped with cutting-edge automation technologies. It incorporates advanced sensors, including LIDAR and cameras, for precise navigation and obstacle detection. This allows the robot to autonomously navigate complex environments, ensuring safe and efficient transportation of materials and goods. The integration of AI algorithms enables the GVDM-26 to learn from its surroundings, improving its operational efficiency over time.

Another significant characteristic of the Bard GVDM-26 is its modular design. This allows for easy customization based on specific operational needs. Whether it’s adding additional payload capacity or integrating specialized attachments for unique tasks, the modular setup provides flexibility that is essential in dynamic industrial environments.

The Bard GVDM-26 excels in payload capacity, being able to handle substantial weights while maintaining high speed. With a load capacity of up to 1,000 kg, it can support various applications, from transporting raw materials to finished products. This capacity, combined with its speed, makes it a valuable asset for streamlining operations and enhancing workflow efficiency.

Moreover, the GVDM-26 offers seamless connectivity options, allowing it to integrate with existing warehouse and manufacturing systems. This connectivity enables real-time data exchange, facilitating better management of inventory and logistics operations. The robot can communicate with other machinery and software applications, leading to improved coordination across processes.

In terms of user experience, the Bard GVDM-26 features an intuitive interface that allows operators to easily monitor and control the robot. Its user-friendly design simplifies the setup and operational processes, reducing training time for personnel.

Overall, the Bard GVDM-26 stands out for its combination of robust construction, advanced automation technologies, modularity, high payload capacity, and user-friendly design. These characteristics make it an ideal choice for businesses looking to enhance their operational efficiency and adapt to the evolving demands of the industrial landscape. As industries continue to trend towards automation, the Bard GVDM-26 is poised to be a key player in the era of smart manufacturing and logistics.
Top Page Image Contents