2100-444-003A
Page 46
left of the first two digits. Use the <Up Arrow> key to increment the display to equal the value of the
third digit of the password. Press the <Left Arrow >key to shift the first, second and third digits left. A
new flashing box will appear to the left of the first three digits. Use the <Up Arrow> key to increment
the display to equal the value of the fourth digit of the password. Press the enter key to send the
completed password to the controller.
For instance, The password 1234 would be entered with the following keystrokes.
<F2>, <Left Arrow>, <Up Arrow>, <Left Arrow>, <Up Arrow>, <Up Arrow>, <Left Arrow>,
<Up Arrow>, <Up Arrow>, <Up Arrow>, <Left Arrow>, <Up Arrow>, <Up Arrow>, <Up Arrow>,
<Up Arrow>, <Enter>
If an invalid password is entered the display will flash all asterisks and the authority level will
remain as "Display Only". If a proper password is entered the DAK will revert to the last screen
displayed before the <F2> key was pressed. Access will now be granted to all items that can be changed
with your authority level. See the Setpoints, Alarms, and Override sections above for the required
authority level required to make changes. Password validation times out after 10 minutes.
To return the authority level to Display Only, reenter the Password as "0000" this is the default
password for display only and is an invalid password in any other level.
The Keyboard map shows all keystrokes needed to access all options and displays.