Replacing the oven bulb

IMPORTANT: The oven must be disconnected from your mains supply before you attempt to either remove or replace the oven bulb.

oRemove all oven shelves, oven pans and drip trays, and then the side rack that is on the same side as the oven light.

oRemove the light cover and the rubber seal ring by unscrewing the light cover anti-clockwise.

o Place the glass cover gently on a supported surface, so that damage is not caused to it whilst the bulb is being replaced.

oUnscrew the bulb anti-clockwise and remove it from its holder.

oReplace the bulb with a 25 W/300°C, E14 screw type pygmy.

oDo not use any other type of bulb.

oPlace the rubber seal ring and the light cover back into position and fully tighten it clockwise.

oReplace the side rack, drip trays and oven shelves.

oRestore power to the appliance.

26

Page 26
Image 26
Baumatic BCS450SS manual Replacing the oven bulb