DISHES | TIME (MIN) |
|
|
DISHES FOR 6 PERSONS | |
|
|
You can also use your own experience in determining GB the optimal temperature setting for your needs.
8 Cleaning and Maintenance
Generally speaking, cleaning is the only form of maintenance necessary.
Attention! Before you begin cleaning, disconnect the appliance from the outlet. Disconnect the cord from the outlet and turn off the appliance.
Warning! Do not use harsh detergents or abrasive products and/or scrubbing pads and sponges and sharp objects as they can stain and damage the appearance of the appliance.
Warning! Never use a vacuum cleaner on the internal parts of the appliance.
8.1 Front and Panel Commands
The use of a moist cloth is sufficient when cleaning the appliance. In the event the appliance requires further cleaning, add drops of detergent in the water. Dry the appliance with a dry cloth. The steel front of the appliance can be cleaned with products specifically designed for steel. Such products prevent the formation of dirt on the surface of the drawer. Apply a minimal amount of the product on a soft and apply it to the surface of the appliance.
8.2 Inside Space
To clean the inside space use a moist cloth. In the event the appliance requires further cleaning add drops of detergent to the water. Dry the surface with a dry cloth. Make sure to avoid water draining into the ventilation holes. Only use the appliance after the drawers are dry completely.
9 Troubleshooting
ATTENTION! Repairs must only be performed by specialized and qualified personnel. Any repair work not performed by professional personnel may cause damage to the appliance for which the manufacturer will not be liable.
The following problems can be fixed by the consumer without the assistance of the Service Department.
The drawer is not hot enough. Make sure that:
•The appliance is turned on;
•The correct temperature has been set;
•The opening of the ventilation fan is not blocked by plates or other large obstructions;
•The drawers have had sufficient time to heat up.
The drawer is not hot at all. Make sure that:
•You hear the fan running;
•If the fan is turned on this means that the heating system is working;
•If the fan does not work this means it is defective;
•The circuit fuse is blown.
10 Appliance Installation
10.1 Before you begin installation
Make sure that the voltage shown on the appliance label corresponds to that of your electrical system.
Open the drawer and remove all accessories and packing materials.
Attention! The front of the drawer may be covered with a protective coating over it. Carefully remove the coating before using the appliance. Start by removing the protective film from the bottom. Make sure that the drawer is not damaged. Be certain that the drawer closes properly. In case of damage, contact the Service Department.
The warming drawer can only be attached and installed with the tools provided by the appliance manufacturer. The manufacturer does not guarantee the operation of the appliance if materials from a different manufacturer have been used. The manufacturer is not responsible for damage caused by improper use.
10.2 Proceed
Before you begin assembling the drawers of the appliance, make sure there is enough room to fit the drawer and the appliance.
The precise dimensions for the installment are indicated in mm. Follow these guidelines for assembly:
•Position the drawer so that it is directly centered
•Be certain that the frame is perfectly perpendicular
•Open the drawer and fix the structure to the wall with
the two screws already in place
10.3 Electrical Installation
The electrical connection must be made by a qualified electrician conforming to current regulations.
20
