Cleaning the spray arms
The spray arms should be cleaned regularly, to prevent hard water deposits from clogging the spray arm jets and bearings.
oTo remove the upper spray arm, unscrew the nut and take out the washer that sits on top of the spray arm.
oGently pull upwards to remove the lower spray arm.
oWash the spray arm in warm, soapy water and use a soft brush to clean the jets.
oRinse the spray arm thoroughly and then reassemble the spray arm back in its original position.
Cleaning the control panel
IMPORTANT: Do not use any abrasive cleaner or household polish on either the control panel or operating parts.
oWipe over the control panel using a brand new damp cloth with warm water.
28
