E3
oLonger heating time- not reaching the required temperature.
9 Malfunction of the temperature sensor or heating element.
9 Call the Baumatic Customer Care Department.
E4
oThe machine has sensed water in the base.
9Check that the outlet hose is not kinked or crushed.
9Check that there are no blockages in the drain hose or the drainage system that the appliance is connected to.
9The drain pipe may be placed in too high a position or incorrectly. Check the installation instructions and ensure that the installation is correct.
E5
oSwitch cannot shut off automatically- program not finishing its cycle.
9Low voltage or power switch failure.
9Call the Baumatic Customer Care Department.
E6
oOpen circuit
9 Thermistor
9 Call the Baumatic Customer Care Department.
E7
oShort circuit
9 Thermistor
9 Call the Baumatic Customer Care Department.
oOnce you have taken action to rectify the problem that has caused the fault code to appear, plug the machine back into your mains power supply.
oTurn the machine on using the ON/OFF button and wait for 5 seconds.
oPress and hold down the delay start button and the ON/OFF button, until the appliance switches off.
oWait for 5 seconds, and then switch back on the appliance using the ON/OFF button.
oWait for a further 5 seconds before attempting to set a wash program, using the program selection button.
30
