Cleaning the door
oTo clean the edge around the outside of the door, you should use a soft, damp cloth only.
oTo prevent water from penetrating the door lock or electrical components, DO NOT use a spray cleaner of any kind.
oDO NOT use any abrasive cleaner or scouring pads on the inner or outer surfaces, as they may cause damage to them.
Error code failure system
If your appliance senses that it is not operating correctly, then an error code may appear in the display window.
The following error codes can possibly be remedied by the customer and the steps outlined below should be followed.
BEFORE COMPLETING ANY MAINTAINEANCE ON THE APPLIANCE, IT SHOULD BE DISCONNECTED FROM YOUR MAINS POWER SUPPLY.
E1
oLonger than expected fill time.
9Check the water pressure of your mains water supply.
9Clean the mesh filter that sits in the inlet hose.
9Ensure that the inlet hose is not kinked or crushed.
9Make sure the water tap that the machine is connected to is turned on fully.
E2
oLonger or extended drain time.
9The drain pipe may be placed in too high a position or incorrectly. Check the installation instructions and ensure that the installation is correct.
9Check that the outlet hose is not kinked or crushed.
9Make sure that the drain hose has not extended beyond its original length.
29
