Baumatic BT2760SS manual

Models: BT2760SS

1 40
Download 40 pages 6.08 Kb
Page 27
Image 27

oThe cooker is designed to slot in between 600 mm deep cabinets, which are spaced approximately 940 mm apart.

oIt can also be used as freestanding, with a cabinet to one side, in a corner setting or with its back to a wall.

oIMPORTANT: It must not be situated with either side closer than 20 mm to a combustible wall or cupboard that is taller than the cooker. It should not be installed at the end of a run of cabinets, if there is a cabinet at immediate right angles to the cooker door.

oThe wall behind the cooker and 450 mm above and across the width of the cooker should be an incombustible material and preferably an easy clean surface, such as ceramic tiles.

oAny overhanging surface or cooker hood should be at least 700 mm above the hob top.

oBaumatic do not recommend that the cooker is positioned below wall cupboards, as the heat and steam from the appliance and what is being cooked, may damage the cupboard and its contents.

oThe cooker may be located in a kitchen, or a bedroom, but not in a room containing a bath or shower. The cooker must not be installed in a bedroom of less than 20m³ in size.

oLPG models must not be installed in a room or internal space below ground level (e.g. in a basement).

oThe cooker is fitted with four legs that can be adjusted to match the height of your kitchen cabinets.

oTo assemble them it is necessary to raise the cooker and to screw the four legs into position, on each corner of the base of the appliance.

27

Page 27
Image 27
Baumatic BT2760SS manual