Gas adjustment (Conversion to LPG and flow adjustment)

All work must be carried out by a CORGI registered engineer.

IMPORTANT: Always isolate the cooker from the electricity supply before changing the injectors and/or adjusting the minimum flow of the burners.

oRemove the pan-stands, burners and flame spreaders (A).

oUnscrew the injector (B) and replace it with the stipulated injector for the new gas supply (see table below).

oReassemble all the burners carefully; in particular you should make sure that the flame spreader is correctly placed on the burner.

31

Page 31
Image 31
Baumatic BT2760SS manual