oThe cable can be looped if necessary, but make sure that is not kinked or trapped when the cooker is in position.
Replacing the mains supply cable
If the mains supply cable is damaged, then it must be replaced by an appropriate replacement which can be obtained from the Baumatic Spares Department.
The mains supply cable should be replaced in accordance with the following instructions:
oSwitch the appliance off at the control switch.
oOpen the box of the supply board.
oUnscrew the clamp (A) fixing the cable.
oReplace the cable with one of the same length and in accordance with the specification given above.
oThe 
. It must be about 10 mm longer than the live and neutral wires.
oThe “blue” neutral wire must be connected to the terminal marked with letter (N) - the live wire must be connected to the terminal marked with letter (L).
35
