1.0 Quick Reference Guide
2
Reset
1 3
0 4
bar
ON/OFF/Reset | Display | Central Heating | Calibration Control | System Pressure Gauge |
Selector Switch |
| Temperature Control |
|
|
Reset | Reset | Reset |
OFF Position | Central Heating & Hot Water | Reset |
The boiler will not operate. | Both Heating & Hot Water will operate. | Hold for approx 5 seconds and release. |
Display
2
13
04
bar
Central Heating Indicator - The indicator will illuminate when the boiler is in the central heating mode.
Burner On Indicator - The indicator will illuminate when the burner has fired and is heating your central heating or domestic hot water.
Boiler Output Temperature - In either the central heating or domestic hot water position the display will illuminate showing the current boiler temperature in degrees centigrade.
Central Heating Temperature Control
Turn the knob clockwise to increase or anticlockwise to decrease the temperature. Range 25 - 80° C.
Calibration Control
This control is for use only by the installer or service engineer.
Central Heating System Pressure - The normal operating water pressure is between 1 and
2.0bar. If the pressure exceeds 3 bar the safety pressure valve will operate and a fault is indicated. Contact your Installer.
© Baxi Heating UK Ltd 2010 | 3 |