Manuals / Baxi Potterton / Household Appliance / Boiler

Baxi Potterton 47-393-41, 47-393-40 manual Installation, Unpacking & Initial Preparation, Flushing

Models: 47-393-40 47-393-41 47-393-39 47-393-42

1 64
Download 64 pages 59.33 Kb
Page 30
Image 30

Fig. 39

Fig. 40

145mm

40 model only

For Side Flue Exit

Fig. 41

Fig. 42a

Flushing Tube

Flow Regulator

Wall Plate

Central Heating Return

Fig. 42

 

10.0Installation

10.1Unpacking & Initial Preparation

The gas supply, gas type and pressure must be checked for suitability before connection (see Section 7.4).

NOTE: A small amount of water may drain from the boiler in the upright position.

1.Remove staples, open flaps and remove the cardboard sheet. Remove the polystyrene side pieces and literature. Two people can then lift out the boiler (Figs. 39 & 40).

2.After considering the site requirements

(see Section 7.0) position the fixing template on the wall ensuring it is level both horizontally and vertically.

3.Mark the position of the two most suitable fixing slots for the wall plate and boiler lower fixing holes. It is preferable to use the vertical fixing slots.

4.Mark the position of the centre of the flue hole (rear exit). For side flue exit, mark as shown (Fig. 41).

5.If required, mark the position of the gas and water pipes. Remove the template.

6.Cut the hole for the flue (minimum diameter 116mm).

7.Drill the wall as previously marked to accept the wall plugs supplied. Secure the wall plate using the fixing screws.

8.Using a spirit level ensure that the plate is level before finally tightening the screws.

9.Connect the gas and water pipes to the valves on the wall plate using the copper tails supplied. Ensure that the sealing washers are fitted between the connections.

IMPORTANT: ONLY on 40 models the Cold Water Inlet tap is fitted with a flow regulator. The copper tail is factory fitted on this model, but must be loosened and turned through 180° to point downwards. Ensure the joint is fully tight (Fig. 42a).

10.Fit the filling loop as described in the instructions supplied with it.

10.2Flushing

1.Connect a tube to the central heating flow or return pipe (Fig. 42).

2.Flush thoroughly (see System Details, Section 6.2).

30© Baxi Heating UK Ltd 2012

Page 29 Page 31
Page 30
Image 30
Baxi Potterton 47-393-41 Installation, Unpacking & Initial Preparation, Flushing, After considering the site requirements
Page 29 Page 31

47-393-40, 47-393-41, 47-393-39, 47-393-42 specifications

The Baxi Potterton 47-393-42, 47-393-39, 47-393-41, and 47-393-40 are models of high-efficiency gas boilers designed for residential heating. These models are well-known for their reliability, advanced technology, and user-friendly features, making them a popular choice among homeowners looking to improve their heating systems.

One of the standout features of these models is their energy efficiency. Each unit is engineered to comply with stringent energy-saving regulations, significantly reducing utility bills while maintaining optimal heating performance. They are rated with impressive efficiency ratings, which can lead to long-term savings and a reduced carbon footprint.

The Baxi Potterton range employs a heat exchanger system designed to maximize heat transfer and minimize energy waste. This sophisticated technology ensures that the boiler operates at peak efficiency, providing ample heating for homes even in the coldest months. The use of a durable, high-quality heat exchanger material contributes to the longevity of the unit, reducing the need for frequent repairs or replacements.

Ease of use is another hallmark of the 47-393 series. With an intuitive digital display, users can effortlessly monitor and adjust settings as required. The controls are straightforward, allowing for quick temperature adjustments, system diagnostics, and alerts, creating a hassle-free experience for homeowners.

Safety features are inherent in these models, including built-in safeguards against overheating and pressure fluctuations. The automatic shut-off mechanism ensures that the boiler operates within safe parameters, providing peace of mind to users.

Furthermore, maintenance is simplified with the easy access design. The accessible components make it straightforward for service technicians to perform routine checks and repairs. Regular maintenance is essential for sustaining high performance and extending the lifespan of the boiler.

In conclusion, the Baxi Potterton 47-393-42, 47-393-39, 47-393-41, and 47-393-40 models represent a blend of efficiency, safety, and convenience. Their advanced technologies and features not only enhance the user experience but also contribute to more sustainable heating solutions for homes. Investing in one of these advanced boilers ensures reliable performance, lower energy costs, and a commitment to environmental responsibility.