ENGLISH
SPEAKER CONNECTIONS
Make the speaker connections using speaker wire that is at least 16 gauge or heavier.
As with any audio component, proper phasing of the amplifier and speakers is essential for strong bass response. When connecting, make sure that positive (+) from the amplifier is connected to the positive (+) of the speaker, and the same for negative
LEFT | 2 | 2 | RIGHT | +12V TURN GND |
|
|
| 30 AMP X 2 MAX | ON |
CHIL
FRONT
AR
RIDGED 4
MI
|
|
|
|
|
|
|
4 Ohm | 4 Ohm | |||||
(2 Ohm Minimum) | (2 Ohm Minimum) | |||||
SPEAKER CONNECTIONS (BRIDGED)
The MGA amplifiers are capable of being bridged in a mono configuration. This feature allows you the flexibility of using the amplifier to drive a ** subwoofer or a center channel. In this configuration the amplifier sums the right and left channel to deliver one channel (mono) output.
**CAUTION! In the bridged mode, the amplifier must see the recommended minimum
impedance or higher. Any lower than the recommended minimum impedance will cause the amplifier to overheat and possibly cause permanent damage to the amplifier!
CHIL
LEFT | 2 | 2 | RIGHT | +12V TURN GND |
|
|
| 30 AMP X 2 MAX | ON |
FRO
REAR
BRIDGED 4
MIN
8 Ohm
(4 Ohm Minimum)
9
