MOUNTING THE BAZOOKA
See Model Size
For Length
Figure 9
Model | Length |
RS6A | 17” |
RS8A | 22” |
RS10A | 27” |
Figure 10
7.Adjust buckle end of strap so that it extends out of the mounting base (see figure 9) the proper length for the model size of Bazooka you are installing (Refer to the chart for proper length)
8.Remove any slack in the strap by feeding it out of the mounting base on the loose end of the strap opposite the buckle.
9.Place Bazooka on the mounting bases and fasten the buckles as illustrated in figure
10.The strap should loop through the buck- le and be tightened securely by holding the strap in place with one hand and pulling the loose end away from the buckle, but against the cabinet.
Technical Note
Due to the jarring and shifting that can occur in a vehicle, the mounting straps may stretch or loosen. We recommend that you check the straps regularly to assure that your Bazooka is mounted securely in place.
8
