FRONT PANEL CONTROLS

1

2

3

4

5

1.CLIP LED: Will illuminate at +14dBu, giving a 6dBu warning of the impending distortion at +16dBu, the actual clip point.

2.LO CONTOUR: Regulates the amount of phase corrected bass frequencies.

3.PROCESS: Regulates the amount of phase corrected treble frequencies.

4.BBE FUNCTION: This push button switch allows for quick comparison of processed with unprocessed sound. When the switch is pushed in, the process is on and the indicator LED is green. When the switch is out, the process is off and the indicator LED is red.

5.POWER: This switch controls primary power to the BBE 362XL.

REAR PANEL CONNECTIONS

1

2

3

4

1.AC POWER CORD: Plugs into AC power receptacle. U.S. Model, 100-120Vac, 50/60Hz. All other models, 200-240 Vac, 50/60Hz.

2.FUSE: Turn cap on fuse holder counter-clockwise to remove fuse. (Note: For U.S. Model, replace with 250Vac, 1/2A Fastblow type fuse. For all other models, replace with 250Vac, .125A Fastblow type fuse.)

3.OUTPUT: The output of the BBE 362XL can be taken from the 1/4” stereo TRS Phone Jack or the XLR Jack. Both are balanced and the same point electronically. This allows both outputs to be used simultaneously, eliminating the need for a “Y” cord in the event multiple, balanced outputs are required. The recommended single load impedance is at least 10k Ohms. If both outputs are being used, a minimum of a 22k Ohm load per device is required. (The “load” is determined by the input impedance of the next subsequent component in the signal chain.) The maximum output is rated at +26dBu. Pin #2 is considered the hot or “+” signal. The output impedance of the BBE 362XL is 600 ohms. NOTE: Actual output level will vary due to the selected position of the BBE Process, and the actual input signal level. If both the XLR and Phone Jacks are being used, both must be either balanced or unbalanced. Otherwise a loss of signal level will occur.

4.INPUT: The input of the BBE 362XL is a balanced connection. Although is can be either a TRS 1/4” stereo Phone Plug or an XLR Plug, it is recommended that only one input source be used. Both jacks are the same point electronically, however, due to the input/output impedance characteristics of most audio devices, a loss of signal may occur and/or damage to a component if both inputs are utilized. Pin #2 is considered the hot or “+” signal. The input impedance of th BBE 362XL is 10k Ohms. The maximum signal level is +26dBu.

3

Page 4 Page 6
Page 5
Image 5
BBE 362XL manual Front Panel Controls, Rear Panel Connections
Page 4 Page 6

362XL specifications

The BBE 362XL is a highly regarded professional audio processor that caters to musicians, sound engineers, and audiophiles who seek to enhance their audio experience. This device is part of BBE's lineage of audio enhancement tools, renowned for their ability to bring clarity and depth to sound. The 362XL combines several advanced technologies and features that enable users to achieve outstanding audio quality.

One of the standout features of the BBE 362XL is its proprietary Sonic Maximizer technology. This technology operates on a simple principle: it increases the presence and definition of audio signals by enhancing harmonic content. By separating the low and high frequencies, it applies a sophisticated processing algorithm that ensures clarity without sacrificing the warmth of the sound. The result is a fuller, more vibrant audio profile that can make vocals shine and instruments resonate.

Additionally, the BBE 362XL includes a two-band EQ with separate controls for high and low frequencies. This feature allows for precise tonal adjustments, letting users customize the sound to their specific preferences or requirements. Whether in a studio setting or live performance, the EQ capabilities of the 362XL enable sound engineers to tailor their mix with confidence.

Another characteristic that enhances the usability of the BBE 362XL is its robust construction. The device is designed with durability in mind, making it well-suited for both studio environments and touring applications. The chassis is made from heavy-duty metal, ensuring it can withstand the rigors of regular use without compromising performance.

In terms of connectivity, the BBE 362XL offers a variety of input and output options, accommodating both balanced and unbalanced signals. This flexibility allows it to be seamlessly integrated into various audio setups, whether that involves live sound reinforcement or studio recording.

Overall, the BBE 362XL stands out as an essential tool for anyone looking to elevate their sound quality. With its combination of Sonic Maximizer technology, user-friendly EQ, durable design, and flexible connectivity, the BBE 362XL is equipped to meet the demands of professional audio applications while providing an exceptional listening experience. Whether in a practice space or a live venue, it empowers users to shape and enhance their sound to perfection.
Top Page Image Contents