All four LEDs are on
80% - 100%
Note: Since your iPhone charges before your PowerCase, you will not see charging progress on the PowerCase while the iPhone is charging. This is normal.
Charging and syncing with a computer
[Insert image of iPhone being connected to PowerCase and PowerCase connected by cable to a notebook computer. Similar to
1.Connect your iPhone to the PowerCase
2.Connect the PowerCase to your computer using the included USB cable.
3.Your iPhone will now charge and you can sync your iPhone to your computer as usual. Note: Your iPhone will charge first then the PowerCase will charge (see Charging your PowerCase section above).
Technical Specifications – Model: IP-PC500
∙Lithium Polymer battery capacity: 1700mAh
∙Input charge power: 5VDC / 500mA
∙Output power: 5VDC / 500mA
∙Battery lifetime: > 300 full charge cycles
∙Overvoltage,
∙Normal operating temperature range: 0 ~ 45°C (32F ~ 113°F)
∙Normal storage temperature range:
Limited Warranty
Mizco’s responsibility with regard to this limited warranty shall be limited solely to the repair or replacement at its option, of any product, which fails during normal consumer use for
a period of 1 Year from the date of purchase. This warranty does not extend to damage or failure, which results from misuse, neglect, accident, alteration, abuse, improper installation or maintenance. If at any time during the 1 Year period following the purchase the product fails due to defects in materials or workmanship, return the defective product with freight prepaid and proof of purchase.
All brands represented herein are registered trademarks of their respective manufacturers. Design and specifications are subject to change without notice.
WARNING ! IMPORTANT SAFETY INSTRUCTIONS !
Failure to read and follow these safety instructions could result in fire, explosion, electrical shock or other hazard, causing serious and/or fatal injury and/or property damage.
1. Do not modify, disassemble, open, drop, crush, puncture or shred the product
