5 Installation and Wiring (Continued)

 

3

Setup

 

 

 

 

 

Pot

Toggle Mode

 

 

 

 

Output Mode Switch

 

 

 

 

4”

 

 

 

 

24”

 

4”

 

 

 

 

Pulse Mode

 

 

 

 

 

 

24”

 

 

 

 

MS-08

Sensing Filed

1. Adjust unit to desired setup. Two adjustments can be made to the

2. Adjust Output Mode by moving switch in the up position (Toggle

 

sensor. The Potentiometer is used to adjust the size of the units’

Mode) or in the down positon (Pulse Mode).

 

sensing field and the Output Mode switch is used to select Toggle

Toggle Mode: Recommended for switch applications. In Toggle mode

 

or Pulse mode.

 

2.

Rotate potentiometer clockwise to increase the sensing field. It

a detection activates the relay and a second detection

deactivates the relay.

 

 

may be adjusted from 4” to 24”.

 

Pulse Mode: Recommended for automatic door applications. In Pulse

 

 

 

 

 

 

 

 

mode a detection activates the relay for a short period of

 

 

 

 

time - depending on the duration of movement in front of

 

 

 

 

door.

 

6 Troubleshooting

1

Troubleshooting Procedures

PROBLEM

PROBABLE CAUSE

CORRECTIVE ACTION

Door does not open when swiping hand in

1.

Bad or no power supply.

1.

Check power supply. If LED switches on or

front of sensor.

2.

Detection range is too small

2.

flashes, power connections are OK.

 

3.

Wrong connection.

Adjust the detection range.

 

 

 

 

Remove any metal plates in front of

 

 

 

3.

sensor.

 

 

 

Check wiring and relay connection.

Door remains permanently open.

1.

Environmental conditions are influencing

1.

Remove any moving objects close to the

 

2.

the sensor.

2.

sensor.

 

Wrong connection.

Check wiring and relay connection.

The door remains open after detection/

1.

Wrong output mode.

1.

Switch the output mode to Pulse mode.

activation.

2.

Wrong connection.

2.

Check wiring and relay connection.

12 Company Contact

Do not leave problems unresolved. If a satisfactory solution cannot be achieved after troubleshooting a problem, please

call BEA, Inc. If you must wait for the following workday to call BEA, leave the door inoperable until satisfactory repairs

can be made. Never sacrifice the safe operation of the automatic door or gate for an incomplete solution.

The following numbers can be called 24 hours a day, 7 days a week. For more information, visit www.beasensors.com.

US and Canada:

1-866-249-7937

Southeast: 1-800-407-4545

Canada: 1-866-836-1863

Midwest:

1-888-308-8843

Northeast:

1-866-836-1863

West:

1-888-419-2564

FCC APPROVAL

This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions:

*this device may not cause harmful interference, and

*this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a paticular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

*Reorient or relocate the receiving antenna

*Increase the separation between the equipment and receiver

*Connect the equipment into an outlet on a circuit different from that to which the receiver is connected *Consult the dealer or an experienced radion/TV technician for help

WARN NG: CHANGES OR MOD FICATIONS TO THIS EQU PMENT NOT EXPRESSLY APPROVED BY BEA INC. MAY VO D THE FCC AUTHORIZATION TO OPERATE THIS EQU PMENT.

75.5265.01 20071031

Page 3 of 3

Page 3
Image 3
BEA MS-08 specifications Installation and Wiring, Company Contact, Setup, Troubleshooting Procedures

MS-08 specifications

The BEA MS-08 is an advanced airborne radar system engineered for a variety of military applications, boasting cutting-edge technology and innovative features that enhance situational awareness and operational effectiveness. Developed by the renowned Belgian Aerospace company BEA, the MS-08 radar is designed to integrate seamlessly with modern defense systems while ensuring robust performance in diverse environments.

One of the standout features of the BEA MS-08 is its multi-mode capability, allowing it to adapt to different mission profiles. Whether it's for surveillance, reconnaissance, or targeting, the MS-08 can effortlessly switch modes, providing military operators with the flexibility to respond to real-time threats. The radar employs advanced signal processing techniques to filter out noise and enhance target detection and tracking. This results in improved accuracy and reliability in various weather conditions, making it a dependable asset for air force missions.

Moreover, the radar system is equipped with electronic scanning technology, enabling it to rapidly steer its beam to engage multiple targets with precision. This agility not only enhances its effectiveness in tracking fast-moving objects but also minimizes response time in critical scenarios. The system's high-resolution imaging capabilities allow operators to discern minute details from great distances, further solidifying its application in intelligence gathering.

Another significant characteristic of the BEA MS-08 is its compact and lightweight design. This feature allows for easier integration onto various platforms, including fixed-wing aircraft, helicopters, and unmanned aerial vehicles (UAVs). Additionally, the radar's modular construction simplifies maintenance and upgrades, ensuring it remains at the forefront of technological advancements throughout its operational lifecycle.

Security and cybersecurity are paramount in military operations, and the MS-08 possesses state-of-the-art encryption and anti-jamming features. These capabilities safeguard sensitive data while ensuring uninterrupted operation amidst electronic warfare scenarios.

In summary, the BEA MS-08 is a sophisticated airborne radar system that combines versatility, advanced technology, and high-performance characteristics. Its multi-mode functionality, rapid electronic scanning, compact design, and robust security features make it an essential tool for modern military operations, ensuring that armed forces are well-equipped to handle today's complex and dynamic threat landscape.