Beckett CG10 - page 31

CG10 Burner Manual

Contents

Main Contents General Information .................................................... Pre-installation Checklist ........................................... Start the Burner ........................................................ Maintenance and Service.......................................... General Information Professional Installers Responsibility: Table 1 Burner Speci cations Speci cations Pre-installation Checklist Verify ring input range Minimum Combustion Chamber Dimensions (inches) Clearances Fuel gas supply Flue vent system Verify burner air tube assembly Page Mount the Burner Connect Gas Piping Gas Trains Gas Leaks and Exposion Hazards Provide Over-pressure Protection Page Wire the Burner Sequence of Operation Prepare the Burner for Start-up Delayed Ignition, Explosion and Fire Hazards Start-up checklist Verify the following before attempting to start the burner: Page Start the Burner Burner start procedure Verify input ring rate Figure 11. Shutter and Band Section: Start the Burner Table 2. Initial burner settings Page Pressure Drop, In. WC Rate, MBH CG10.6S CG10.5S CG10.4S CG10.3S CG10.2S CG10.1S Check operation and safety controls Use test instruments to set combustion: Recommended combustion test sequence: Annual maintenance (The following should be performed by a quali ed service technician only.) Maintenance and Service Page Page Page Page For the OPERATOR Replacement Parts Burner Con gurations Burner Con gurations Air Platform Con gurations Page Limited Warranty Information