Section: General Information

Professional Installer’s Responsibility:

Follow these instructions

Specifications

Table 1 – Burner Specifications

exactly.

Failure to follow these instructions could lead to equipment malfunction and result in asphyxiation, explosion or fire.

yPlease read all instructions before proceeding. Follow all instructions completely.

yThis equipment must be installed, adjusted and started by a qualified service agency that is licensed and experienced with all applicable codes and ordinances and responsible for the installation and commissioning of the equipment.

yThe installation must comply with all local codes and ordinances having jurisdiction and the latest edition of the National Fuel Gas Code ANSI Z223.1 (NFPA 54) and CAN1-B149.1 in Canada.

Concealed damage – If you discover damage to the burner or

Input firing range Fuel

Gas train

Manifold pressure Firing mode Flame safeguard Flame detection

Air proving switch

Gas pressure switches

Ignition

Motor

Weight

Dimensions

300 to 1200 MBh

Natural gas - 0.6 specific gravity typical

Standard: UL listed/CSD-1 Configuration

Options: IRI and FM

1.0to 4.6 inches W.C. typical On/Off or On/Off with Low Fire Start RM7895A Standard (Options available)

Standard: Flame rod rectification

Optional: Ultraviolet scanner Standard

Standard high and low

Direct spark main flame

Standard: 1/3 HP; 3450 RPM; 120 volt/60 hz, single phase

Optional motor: 50 or 60 hz (see notice for 50 hz), 240 volt single phase

55 lbs.

Refer to Figure 5.

controls during unpacking, notify the carrier at once and file the appropriate claim forms.

High altitude installations – Accepted industry practice requires no derate of burner capacity up to 2000 feet above sea level. For altitudes higher than 2000 feet, derate the burner capacity 2% for each 1000 feet above the 2000 feet.

50 Hz motors – The burner ratings, air settings and other adjustments are based on 60 hz motors at 3450 rpm. Derate firing capacity 20% when using 50 hz motors. Consult factory for specific application data.

Special Requirements: When contacting Beckett for

service information — Please record the burner serial number (and have available when calling or writing). You will find the serial number on the silver label located on the left rear of the burner. Refer to Figure 1.

Agency Approvals

Underwriters Laboritories Certified by C-UL Accepted by N.Y.C.M.E.A.

Other approvals may be available and must be specified at time of order.

4

Page 3 Page 5
Page 4
Image 4
Beckett CG10 manual Exactly, Special Requirements When contacting Beckett for, Agency Approvals
Page 3 Page 5

CG10 specifications

The Beckett CG10 is a premium gas furnace that stands out in today's competitive heating market due to its innovative technology and reliable performance. Designed with efficiency and comfort in mind, the CG10 model ensures optimal heating solutions for residential spaces.

One of the most significant features of the Beckett CG10 is its impressive Annual Fuel Utilization Efficiency (AFUE) rating. With ratings often exceeding 90%, this furnace significantly reduces energy consumption and ensures cost-effective heating. This high-efficiency rating translates to lower utility bills and less environmental impact, making it a smart choice for eco-conscious homeowners.

The CG10 utilizes advanced combustion technology to ensure that fuel is burned effectively, maximizing heat generation while minimizing emissions. This innovative technology not only enhances the furnace's performance but also contributes to cleaner air, aligning with modern environmental standards.

A notable characteristic of the Beckett CG10 is its quiet operation. The unit is designed to operate with minimal noise, ensuring a comfortable living environment without disruptive sounds. This is particularly important for families and individuals who prioritize tranquility in their homes.

The furnace is built with durable materials, ensuring longevity and reliable performance over the years. Its construction adheres to strict industry standards, making the CG10 both robust and dependable. Regular maintenance is simplified thanks to its user-friendly design, which allows homeowners to access critical components easily.

Safety is a paramount concern in any heating system, and the Beckett CG10 does not disappoint. It comes equipped with multiple safety features, including flame sensors and safety shut-off mechanisms, ensuring peace of mind for users.

Additionally, the Beckett CG10 can be integrated with smart home technology, allowing homeowners to monitor and control their heating system remotely. This capability enhances convenience and provides further energy savings, as users can adjust their heating preferences from anywhere.

In summary, the Beckett CG10 gas furnace presents an ideal solution for homeowners seeking a blend of efficiency, durability, and advanced technology in their heating systems. Its high AFUE rating, quiet operation, and safety features make it a top choice for those prioritizing comfort and environmental responsibility.
Top Page Image Contents