Beckett CG25, CG50, CG15 manual Propane Restrictor Description, Installation

Section: Maintenance and Service

Propane Restrictor Description

The Beckett Propane Restrictor Conversion Kit allows for the conversion of CG15, CG25, and CG50 burners for use with propane gas. With the proper installation of the restrictor and attached O-ring, adjustments and settings for propane use will be the same as the adjustments and settings for natural gas use as detailed in the burner manual.

This conversion kit shall be installed by a qualified

service agency in accordance with the manufacturer’s instructions and all applicable codes and requirements of the authority having jurisdiction. (In Canada, in accordance with the requirements

of the CAN/CGA-B149 Installation Code.) If the information in these instructions is not followed exactly, a fire, explosion, or production of carbon monoxide may result causing property damage, personal injury or loss of life. The qualified service agency is responsible for the proper installation of this kit. The installation is not proper and complete until the operation of the converted appliance

is checked, as specified in the manufacturer’s instructions supplied with the kit.

Figure 16 – Propane Conversion Major Components

B

C

D A

E

HG

F

Installation

Note that Steps 1 and 2 on the reverse side refer to fully assembled burners. Skip to Step 3 when converting a burner without the air tube assembly installed. Refer to Figures 16 and 17 when performing the following steps.

CG15 is shown in the illustrations. CG25 and CG50 are similar.

CG10 is similar with the exception of having the gas gun assembly mounted into the air tube instead of the housing.

Figure 17 – Component Locations

B

E

C

H

G

F

Major Component Key for Figure 16 & 17

A	Air Tube	E	External Gas Manifold
B	Jacking Screw	F	Propane Restrictor
C	Internal Gas Tube	G	Restrictor O-ring
D	Burner Housing	H	Gas Tube O-ring

CG15, CG25, CG50 Burner Manual

31