General Information

To the Owner:

Thank you for purchasing a Beckett NX burner

for use with your heating appliance. Please pay atten- tion to the Safety Warnings contained within this in- struction manual. Keep this manual for your records and provide it to your qualified service agency for use in professionally setting up and maintaining your NX burner.

Your NX burner will provide years of efficient operation if it is professionally installed and maintained by a quali- fied service technician. If at any time the burner does not appear to be operating properly, immediately con-

tact your qualified service agency for consultation.

We recommend annual inspection/service of your oil heating system by a qualified service agency.

Hazard Definitions

!DANGER Indicates an imminently haz- ardous situation, which, if not

avoided, will result in death, serious injury, or property damage.

!WARNING Indicates a potentially hazardous situation, which,

if not avoided, could result in death, severe personal injury, and/or substantial property damage.

 

Indicates a potentially haz-

! CAUTION

ardous situation, which, if

not avoided, may result in personal injury or property damage.

Within the boundaries of the hazard warning, there will be information presented describing consequences if the warning is not heeded and instructions on how to avoid the hazard.

NOTICE

Intended to bring special attention to information, but not related to personal injury or property damage.

General Information

!WARNING Owner’s Responsibility

Incorrect installation, adjustment, and use of this burner could result in severe personal injury, death, or sub- stantial property damage from fire,

carbon monoxide poisoning, soot or explosion.

Contact a professional, qualified service agency for the installation, adjustment and service of your oil heating system. This work requires technical training, trade ex- perience, licensing or certification in some states and the proper use of special combustion test instruments.

Please carefully read and comply with the following in- structions:

Never store or use gasoline or other flammable liquids or vapors near this burner or appliance.

Never attempt to burn garbage or refuse in this appliance.

Never attempt to light the burner/appliance by throwing burning material into the appliance.

Never attempt to burn any fuel not specified and approved for use in this burner.

Never restrict the air inlet openings to the burner or the combustion air ventilation openings in the room.

!WARNING ProfessionalRequired Service

Incorrect installation, adjustment, and use of this burner could result in severe personal injury, death, or

substantial property damage from fire, carbon monoxide poisoning, soot or explo- sion.

Please read and understand the manual supplied with this equipment. This equipment must be installed, adjust- ed and put into operation only by a qualified individual or service agency that is:

Licensed or certified to install and provide technical service to oil heating systems.

Experienced with all applicable codes, standards and ordinances.

Responsible for the correct installation and commis- sion of this equipment.

Skilled in the adjustment of oil burners using combus- tion test instruments.

The installation must strictly comply with all applicable codes, authorities having jurisdiction and the latest revi- sion of the National Fire Protection Association Standard for the installation of Oil-burning Equipment, NFPA 31 (or CSA B139 and B140 in Canada).

Regulation by these authorities take precedence over the general instructions provided in this installation manual.

RWB 6104 BNX R02

Page 3

Page 3
Image 3
Beckett NX manual General Information, To the Owner, Hazard Definitions

NX specifications

Beckett NX is a cutting-edge oil burner that exemplifies energy efficiency and reliability in heating systems. Designed for both residential and commercial use, the Beckett NX system is engineered to optimize performance while minimizing energy consumption and emissions.

One of the standout features of the Beckett NX is its advanced combustion technology. It utilizes a precision-designed nozzle that ensures a fine mist of oil is atomized for optimal combustion. This not only enhances efficiency but also significantly reduces smoke and particulate emissions, making it an environmentally friendly choice in today’s market. The system is equipped with diagnostic capabilities that allow for easy troubleshooting, enabling users to monitor performance and quickly address any potential issues.

Another significant characteristic of Beckett NX is its compact design, which allows it to fit seamlessly into various heating systems without requiring extensive modifications. This makes it an ideal solution for both new installations and retrofitting existing systems. The burner is also designed for quiet operation, reducing noise levels compared to traditional models and ensuring a more comfortable indoor environment.

In terms of safety, the Beckett NX incorporates numerous features to ensure reliable operation. It includes a burner control that monitors flame stability and combustion quality, providing real-time feedback. With built-in safety mechanisms, such as a flame safeguard, the system minimizes risks associated with malfunctioning equipment.

The technology behind Beckett NX also embraces modern connectivity options. The burner can be integrated with smart home systems, allowing users to adjust settings remotely and monitor heating performance through dedicated apps or interfaces. This level of control empowers homeowners and business operators alike to enhance their heating efficiency further.

Finally, the Beckett NX is designed for longevity and ease of maintenance. Its modular components allow for straightforward access, simplifying routine servicing and reducing downtime. With a robust build quality that withstands the rigors of daily use, the Beckett NX promises durability and reliability for years to come.

In summary, Beckett NX stands out in the heating industry for its combination of advanced combustion technology, compact design, safety features, smart connectivity, and ease of maintenance. These characteristics make it a leading choice for those seeking an efficient and effective oil burner solution, ensuring homes and businesses stay warm while being mindful of environmental impact.