1. INTRODUCTION

Congratulations! With our new BEHRINGER TRUTH B2031 you have purchased one of the best high-resolution active studio monitors available. It is a tool that reproduces your program material with highest fidelity and balance, positioning sound sources accurately on the stereo basis.

We recommend that you experiment with your B2031 away from the pressures of a recording session, in order to get a feel for it. It will be a good idea to listen to your favorite CD's over the TRUTH, so that you can get an impression of the neutral sound this speaker produces - which might be somewhat unusual at first!

1.1 The concept

The B2031 is equipped with two separate power amps for the woofer and tweeter ranges. With 150 and 75 Watts respectively, these amps have lots of power reserves. In the low-frequency range we used an 8.75" soft-suspension speaker with a sturdy cast aluminum chassis. Its effective operating range is expanded downwards by a special bass reflex system. The innovative shape of the reflex tunnel reduces airflow noise even at highest sound pressure levels. In the high-frequency range a titanium-dome tweeter ensures an extremely fine signal resolution. Sophisticated circuitry is used to protect both chassis and amplifiers against overloading. Both speakers are electromagnetically shielded, so that you can operate the TRUTH in close proximity to your computer monitor or TV set. The individual frequency ranges driving the speakers are derived by means of an active crossover network, which allows for the precise separation of frequency bands and the perfect adaptation of two speakers to each other. Rear-mount switches enable you to configure the crossover networks, so as to adapt the speakers to specific room acoustics. More on this later.

High-quality components and design

The philosophy behind BEHRINGER products guarantees a no-compromise circuit design and employs the best choice of components. The operational amplifiers 4580 which are used in the TRUTH B2031, are exceptional. They boast extreme linearity and very low distortion characteristics. To complement this design the choice of components includes high-tolerance resistors and capacitors, high-grade switches and several other stringently selected elements. Additionally, the TRUTH is manufactured in compliance with a ISO9000 certified management system.

1.2 Before you start

Your TRUTH was carefully packed in the factory and the packaging is designed to protect the unit from rough handling. Nevertheless, we recommend that you carefully examine the carton and its contents for any signs of physical damage, which may have occurred during transit.

+If the unit is damaged, please do NOT return it to BEHRINGER, but notify your dealer and the shipping company immediately, otherwise claims for damage or replacement may not be granted. Shipping claims must be made by the consignee.

The TRUTH must be placed on a flat and stable surface. Be sure that there is enough air space around the unit for cooling and please do not place the TRUTH on high-temperature devices such as power amps, etc. to avoid overheating.

+Before you connect the TRUTH to the mains, please make sure that your local voltage matches the voltage required by the unit!

Please use the enclosed power cord to connect the unit to the mains. The cord complies with all applicable safety standards.

+Please note that all units must be grounded properly. For your own safety, you should never remove any ground connectors from electrical devices or power cords or render them inoperative.

Further information can be found in chapter 3 "INSTALLATION".

E

1. INTRODUCTION

7

Page 6 Page 8
Page 7
Image 7
Behringer B2031 user manual Introduction, Concept, Before you start
Page 6 Page 8

B2031 specifications

The Behringer B2031 is a powerful studio monitor designed to deliver exceptional sound quality and precision at an affordable price. Known for its transparent audio reproduction, the B2031 is a popular choice among producers, musicians, and sound engineers who seek accuracy in their monitoring environment.

One of the standout features of the B2031 is its 8-inch polypropylene woofer, which provides a rich bass response and enables the monitor to handle low frequencies effectively. This is complemented by a 1-inch silk dome tweeter that produces smooth high frequencies, ensuring that every detail in the audio is clearly represented. Together, these drivers facilitate a frequency response ranging from 40Hz to 20kHz, making the B2031 suitable for a wide variety of genres and applications.

The B2031 is equipped with a high-resolution crossover system that integrates the low and high frequencies seamlessly. This technology minimizes phase distortion, allowing for greater clarity and definition in the audio output. The internal amplifier is designed to produce 150 watts of power, providing ample headroom for loud monitoring without sacrificing audio integrity.

In terms of connectivity, the Behringer B2031 offers balanced XLR and 1/4-inch TRS inputs, ensuring versatility in connecting to different audio interfaces and mixers. Additionally, a front-mounted volume control allows for easy adjustments without needing to reach around to the back of the monitor.

The cabinet design of the B2031 plays a crucial role in its performance. It features a bass reflex port that enhances low-end response while reducing distortion. The enclosure is crafted from MDF, which helps to eliminate resonance and provide a neutral listening environment. Moreover, the attractive black finish ensures that the monitor will fit seamlessly into any studio or home audio setup.

Overall, the Behringer B2031 is an excellent choice for anyone in need of reliable studio monitors that deliver professional-grade performance. With its impressive frequency response, powerful drivers, and thoughtful design, the B2031 stands out as an affordable option without compromising on sound quality. Whether you’re mixing, mastering, or simply enjoying music, the B2031 can enhance your audio experience significantly.
Top Page Image Contents