Behringer manual The Presets Of The Minicom, MINICOM COM800, Preset categories

MINICOM COM800

3. THE PRESETS OF THE MINICOM

The COM800 comes with a total of 16 different presets. These pre-programmed compressor settings save you a lot of work and trouble. Depending on the application in question they give you the desired results. You don’t have to be familiar with the complex parameters of a compressor for your music to benefit from the use of the COM800.

Some presets are designed for stereo signals, some can be used for mono signals only. Depending on the preset chosen you can use your COM800 to process single or mix signals.

+When using a mono preset only one mono signal can be processed with the COM800.

In this case please use the INPUT jack L (MONO)	. It is not possible to process
two mono signals independently of each other!

3.1 Preset categories

The COM800 features presets for compressing individual signals (e.g. guitar, drums, etc.) or stereo/ mix signals (e.g. keyboard, main mix, sub-groups). To give you a better overview, the presets are

grouped ￿￿￿￿￿￿￿￿in six categories based on typical￿￿￿￿￿￿￿￿￿￿￿applications.			￿￿￿￿￿￿￿￿￿￿￿
	Vocals	Optimized settings for vocal parts with lots
		of punch and presence using different	Individual signals
	(presets 1-3)
		degrees of compression.
	Drums + percussion	Special presets with optimized control times	Individual/stereo signals
	(presets 4-5)	for powerful percussion sounds.
	Guitars	Adapted control behavior for powerful	Individual signals
	(presets 6-8)	electric and punchy acoustic guitars.
	Keyboards	Maximized sound density for electronic	Stereo signals
	(presets 9-11)	keyboard sounds and piano.
	Limiter	Mastering presets ensuring effective
		loudness maximization and level limiting for	Mix signals
	(presets 12-13)
		“mighty mixes”.
	All-round/special	Presets for special applications.	Individual/mix signals
	(presets 14-16)
		Table 3.1: The preset categories of the MINICOM

3. THE PRESETS OF THE MINICOM 9