DI400P
Technical Specifications
Version 1.0 February 2006
FEATURES
sConnect your guitar or bass directly to your mixer without losing
tone due to impedance mismatches, long cables and cycle hum
s Converts any unbalanced
s Provides impedance and signal matching for the direct connection of instruments to amplifiers and mixers
s Allows the use of long cables without losing high frequencies
s Thru/Out jack lets you send the unbalanced signal to an onstage amplifier while the balanced signal is routed to the mixer
s Ground lift switch eliminates typical ground loop problems such as hum
s
s
sConceived and designed by BEHRINGER Germany
ULTRA-DI
SPECIFICATIONS
Frequency response | 40 Hz |
THD+N (distortion) | 0.007% @ 1 kHz, input level +4 dBu |
INPUT | ¼" TS (unbalanced) |
Level change (input ß output) | |
OUTPUT | Balanced XLR |
Impedance ratio (input ß output) | 110 : 1 |
Dimensions (H x W x D) | 1.4" x 4.7" x 2.6" (35 mm x 120 mm x 66 mm) |
Weight | approx. 0.44 lbs (0.2 kg) |
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER® nor affiliation of the trademark owners with BEHRINGER®. BEHRINGER® accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colours and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER® and have absolutely no authority to bind BEHRINGER® by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a registered trademark.
ALL RIGHTS RESERVED. © 2006 BEHRINGER Spezielle Studiotechnik GmbH,
Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
