VIRTUALIZER PRO DSP2024P

1.2 Before you get started

The VIRTUALIZER PRO was carefully packed in the factory to ensure safe transport. Nevertheless, if the box shows signs of damage, please check the equipment immediately for any signs of external damage.

If the unit is damaged, please do not return it to BEHRINGER, but notify your dealer and the shipping company immediately. Otherwise, claims for damage or replacement may not be granted. Shipping claims must be made by the consignee.

The BEHRINGER VIRTUALIZER PRO requires one standard 19" rack unit of space (1 3/4"). Please leave an additional 4" installation depth to allow connections at the rear side.

Make sure that there is adequate ventilation and do not place the VIRTUALIZER PRO on top of an amplifier, which could cause overheating.

Before connecting the VIRTUALIZER PRO to the mains, carefully check that your equipment is set to the correct voltage:

The fuse holder on the female mains connector has 3 triangular markings, with two of these triangles opposing each other. The VIRTUALIZER PRO is set to the operating voltage printed next to these markers and can be set to another voltage by turning the fuse holder by 180°. CAUTION: This instruction does not apply to export models exclusively designed, e.g. for 115-V operation!

Connection to the mains is made by a mains cable with an IEC receptacle that complies with the required safety regulations.

All pieces of equipment must be grounded. For your own safety, under no circumstances should you remove or de-activate the grounding of your equipment or the mains cable.

Installation and operation of this equipment must be carried out by competent staff only. Both before and after installation, the staff using the equipment should make sure that it is properly grounded since otherwise electrostatic discharge etc. can lead to an impairment of its operation. For more information, see chapter 6 “INSTALLATION”.

The BEHRINGER VIRTUALIZER PRO is equipped with electronically servo-balanced inputs and outputs. The circuit design features automatic hum suppression for balanced signals and thus ensures trouble-free operation, even at the highest operating levels. Externally induced mains hum, etc. can therefore be effectively suppressed. The automatic servo-function recognizes the presence of unbalanced connectors and adjusts the nominal level internally to avoid level differences between the input and output signals (6-dB correction).

The MIDI connectors (IN/OUT/THRU) are standard DIN plug connections. The data communication is isolated from ground by opto-couplers.

1.3 Control elements

Fig. 1.1: VIRTUALIZER PRO front panel

The BEHRINGER VIRTUALIZER PRO’s front panel includes five edit controls (non-intermittent rotary controls), a jog wheel (big rotary control), six parameter keys, an LED display and a mains switch. Each of the two fully independent channels can be monitored with an 8-digit LED meter.

1. INTRODUCTION

7

Page 6 Page 8
Page 7
Image 7
Behringer DSP2024P user manual Before you get started, Control elements
Page 6 Page 8

DSP2024P specifications

The Behringer DSP2024P is a versatile digital signal processor that has gained popularity among audio professionals and enthusiasts alike. This device is designed to enhance audio quality by providing a wide array of effects, allowing for greater creativity and control over sound.

At the heart of the DSP2024P lies its powerful DSP engine, which delivers high-quality processing capabilities. It features 24-bit resolution, ensuring that audio signals maintain clarity and detail through various manipulations. This processor is equipped with a wide range of effects, including reverb, delay, chorus, flanger, and even pitch shifting, allowing users to experiment with different soundscapes and textures.

One of the standout features of the DSP2024P is its User-Friendly interface. The device is designed with a clear LCD display, which presents real-time information about the selected effects and parameters. This allows users to navigate the menu efficiently and make adjustments on the fly without getting lost in complex settings. It also includes a built-in virtual patch bay, making it easy to route effects to different channels and applications.

Another key technology in the DSP2024P is its advanced dynamic processing. The device can handle complex audio signals with ease, providing users with tools like compression, expansion, and gating. This allows for precise control over dynamics and ensures that audio mixes maintain their integrity even in challenging environments.

The DSP2024P is also equipped with MIDI interfacing capabilities. This feature enables the processor to synchronize with other MIDI-compatible devices, facilitating seamless integration into live setups or studio environments. Users can recall presets remotely via MIDI, which is particularly advantageous during live performances.

Moreover, the robust build quality of the DSP2024P ensures durability and reliability, making it a suitable choice for both studio and stage applications. The rackmountable design also offers ease of integration into existing setups, allowing for a clean and organized workspace.

In summary, the Behringer DSP2024P stands out for its powerful processing capabilities, diverse effects, intuitive user interface, and solid construction. Whether used in a studio, during live performances, or for personal projects, this digital signal processor proves to be an invaluable tool for any audio professional looking to explore the possibilities of digital audio manipulation.
Top Page Image Contents