Behringer MX2642A manual Specifications

	EURORACK MX2642A
10. SPECIFICATIONS
Input Channels
Mic Input	Electronically balanced, discrete input configuration
Mic E.I.N. (22 Hz - 22 kHz)	-129.0 dBu, 150 Ohm source
	-117.3 dBqp, 150 Ohm source
	-132.0 dBu, input shorted
	-122.0 dBqp, input shorted
Distortion (THD & N)	0.007% @ +4 dBu, 1 kHz, bandwidth 80 kHz
Gain Range	+10 dB to +50 dB
Max Input (Mic)	+12 dBu
Line Input	Electronically balanced
Gain Range	Unity to +40 dB
Max Input (Line)	+22 dBu
Channel Fader Range	+10 dB to -85 dB
Aux Send Gain Range	“Off” to Unity to +15 dB
Equalization
Hi shelving	12 kHz +/-15 dB, Q fixed at 2 oct.
Hi Mid shelving	3 kHz +/-15 dB, Q fixed at 2 oct.
Mid sweep	100 Hz - 8 kHz +/-15 dB, Q fixed at 1 oct.
Lo Mid shelving	500 Hz +/-15 dB, Q fixed at 2 oct.
Lo shelving	80 Hz +/-15 dB, Q fixed at 2 oct.
Lo Cut (High Pass) filter	75 Hz, 18 dB/oct.
Channel Direct Out
Max Output	+22 dBu
Noise @ Unity Gain	-94 dBu
Output Impedance	120 Ohm
Channel Insert
Max In / Out	+22 dBu
Channel to Channel Crosstalk	-95 dB @ 1 kHz
Subgroup Section
Noise	Bus noise @ fader 0 dB: -102.5 dBr (ref.: +4 dBu);
	-92.5 dBr (ref.: +4 dBu, all channels assigned and set @ Unity Gain)
Submaster Output Max Out	+22 dBu balanced/unbalanced
Fader Range	+10 dB to -85 dB/“off”
Main Mix Section
Noise	Bus noise @ fader 0 dB: -101.0 dBr (ref.: +4 dBu);
	-92.5 dBr (ref.: +4 dBu, all channels assigned and set @ Unity Gain)
Max Output	+28 dBu balanced, +22 dBu unbalanced
Aux Returns Gain Range	“off” to Unity to +20 dB
Aux Sends Max Out	+22 dBu
General
Distortion (THD & N)	0.007 %, @ +4 dBu, 1 kHz, Bandwidth 80 kHz;
Frequency Response	20 Hz - 40 kHz, +/- 1 dB
	any input to any output: 10 Hz -120 kHz +/- 3 dB
Physical
Dimensions (H * W * D)	ca.23/8"/6"(61/152.4mm)x171/8"/19"(435.6/482.6mm)x14"(355.6mm)
Net weight	7.5 kg

BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or shown.

10. SPECIFICATIONS 21