16EUROPOWER PMP1000/PMP4000/PMP6000 User Manual

5.Wiring Examples

Subwoofer

F.O.H. mix

Monitor mix

Loudspeaker connection (monitor mix)

PMP1000

PMP4000

PMP6000 (part view)

2 x BEHRINGER EUROLIVE Stack (B1800X & B1220, both passive)

PMP1000

PMP4000

PMP6000

Rear panel

EUROPOWER EP2000

Loudspeaker connection (monitor mix)

front panel (part view)

EUROLIVE

VP1520

EUROLIVE B1800X

Subwoofer

Footswitch

2 x BEHRINGER F1220D (active)

Fig. 5.1: Stereo operation

Link Output

2 x BEHRINGER F1220D (active)

Fig. 5.2: Bridged mono operation

This illustration shows the power mixer with a sub-woofer connected to OUTPUT B. For a bridged mono operation to OUTPUT B, the AMP MODE selector switch (27) must be set to its lower position “BRIDGE”. A separate stereo power

For stereo operation the POWER AMP switch (27) must be set to its upper position (MAIN or MAIN L/MAIN R). Outputs A and B provide the stereo main signal for passive speakers. The preamp monitor output is connected to two parallel active speakers, which are used as on-stage monitors. Use the footswitch to enable/ disable the effects processor.

amp (BEHRINGER EUROPOWER EP2000) connected to the preamp main outputs delivers the stereo main signal. Two active monitor speakers for on-stage operation are connected to the preamp monitor output.