Behringer PMP4000, PMP6000, PMP1000 6.Specifications, MAIN, PMP1000, Load impedance:, RMS @ 1% THD, bridged mode:, Peak Power, both channels driven:, RMS @ 1% THD, both channels driven:

19EUROPOWER PMP1000/PMP4000/PMP6000 User Manual

PMP1000

Microphone Inputs
		Type	XLR, electronically balanced input circuit
	Mic E.I.N. (20 Hz - 20 kHz)
		@ 0 Ohm	-134 dB / 136 dB A-weighted
		source resistance
		@ 50 Ohm	-131.5 dB / 134 dB A-weighted
		source resistance
		@ 150 Ohm	-129 dB / 155 dB A-weighted
		source resistance
		Frequency response	< 10 Hz - 200 kHz (-1 dB)
			< 10 Hz - > 200 kHz (-3 dB)
		Gain	+10 dB, +60 dB
		Max. input level	+12 dBu @ +10 dB gain
		Impedance	approx. 2.6 kOhm balanced
			approx. 1.3 kOhm unbalanced
		Signal-to-noise ratio	109 dB / 112 dB A-weighted
			(0 dBu In @ +10 dB gain)
		Noise (THD + N)	0.002% / 0.0018% A-weighted

Mono Line Inputs
		Type	1/4" TS connectors, balanced
		Impedance	approx. 20 kOhm
		Max. input level	+21 dBu

Equalizer
		Low	80 Hz / +/-15 dB
		Mid	2.5 kHz / +/-15 dB
		High	12 kHz / +/-15 dB

2 Track Input
		Type	RCA
		Impedance	approx. 3.6 kOhm

Preamp Outputs
	MAIN
		Type	1/4" TRS connectors, unbalanced
		Impedance	approx. 150 Ohm, unbalanced
		Max. output level	+21 dBu

Monitor

Stereo Outputs

		Type	RCA
		Impedance	approx. 1 kOhm
		Max. input level	+21 dBu

Loudspeaker Outputs
		Type	Professional locking connector
	Load impedance:
		MAIN L/R	4	- 8 Ohm
		MONITOR/MAIN MONO	4	- 8 Ohm
		MAIN MONO/MAIN MONO	4	- 8 Ohm
		BRIDGE	8	- 16 Ohm

DSP
		Converter	24-bit Delta-Sigma, 64/128-times oversampling
		Dynamics D/A	90 dB
		Sampling rate	46.875 kHz
		Delay Time	max. 5 secs
		Signal run time	approx. 1.5 ms
		(Line In > Line Out)

Display
		Type	2-digit, 7 segment LED

Output Power

RMS @ 1% THD, both channels driven:

8 Ohm per channel	90 W
4 Ohm per channel	130 W

RMS @ 1% THD, bridged mode:

8 Ohm

200 W

Peak Power, both channels driven: