Behringer FADERB CF2000B, ROTARY BCR2000 manual Control surface of the B-CONTROLs

B-CONTROL FADER BCF2000/B-CONTROL ROTARY BCR2000

Fig. 3.1: The control surface of the B-CONTROLs

Fig.3.2: The back of the BCF2000 (control elements to coincide with the BCR2000)

CONTROLLER connector (BCF2000 only). Here, you can connect a footswitch that can be used for controlling assignable MIDI data.

The POWER switch turns your B-CONTROL on. The POWER switch should always be in its “Off” position when connecting the unit to the mains.

+Please keep in mind: The POWER switch does not fully disconnect your B-CONTROL from the mains. Always unplug the power cord from the mains if you don’t intend to use your B-CONTROL for longer periods of time.

The connection to the mains is established using a standard connection socket. A matching cable is included in the shipment.

SERIAL NUMBER. Please take the time to fill out and return the warranty card within 14 days after the date of purchase to benefit from our extended warranty. The serial number is located on the top side of your REV2496. You can also register online at www.behringer.com.

3. CONTROL ELEMENTS AND CONNECTIONS 7