Behringer UMX610 Specifications, 4.2.10 Velocity Sensitivity, 4.2.11 The FACTORY RESET command, SWITCH PLUG, POWER SUPPLY, USB Connections, MIDI connections, CONTROL ELEMENTS

ENGLISH

1)Press the ASSIGN button and keep it pressed.

2)Press the one of the two OCTAVE SHIFT buttons to which you want to assign a controller.

3)Release the ASSIGN button.

4)Assign the channel. Press one of the 16 channel keys

CH 1 to		CH 16 . You can assign each of both
the OCTAVE SHIFT buttons to an individual MIDI
channel.
5) Press the	CC	key to be found under

BUTTON ASSIGN .

6)Press the number keys on the keyboard to enter the controller number of your choice (as described in Chapter 4.2.7).

7)Confirm your selection with ENTER. To discard your assignments either press the CANCEL key or the ASSIGN button again. In all 3 cases the ASSIGN LED goes out.

4.2.10 Velocity Sensitivity

The sensitivity of the UMX can be regulated so that the velocity of the keys has an effect on the volume level.

1)Press the ASSIGN button and keep it pressed.

2)Use the number keys to enter the keyboard velocity (see Table 4.1).

3)Release the ASSIGN button.

4)Confirm your selection with ENTER. To discard your assignments either press the CANCEL key or the ASSIGN button again. In all 3 cases the ASSIGN LED goes out.

Key

Effect on key velocity

OFF: velocity value is fixed to 110.

0Change of key pressure has no effect on

volume level.

SOFT: key pressure is very sensitive; low

1velocity changes create high changes in

volume level

MEDIUM: key pressure is “normal”; (very)

2hard hit notes are (very) loud, (very) soft hit notes produce (very) low volume

3HARD: key pressure is more unsusceptible

compared to all other settings

4-9	invalid input

Table 4.1: Effect of RANGE definition on keyboard velocity

U-CONTROL UMX490/UMX610 User Manual

4.2.11 The FACTORY RESET command

To reset all settings on your UMX, proceed as follows:

1) Press the ASSIGN push-button and hold it down.

2a) To cause a temporary FACTORY RESET, simultaneously press both OCTAVE SHIFT push- buttons. All temporarily changed control elements are returned to their factory settings. The USER MEMORY, however, is retained and will not be reset.

2b) Simultaneously press the

and

0keys to perform a complete FACTORY RESET. In this case, the USER memory is also overwritten, in addition to resetting all control elements of the FACTORY MEMORY.

3)Release the ASSIGN push-button again. The LED of the ASSIGN push-button stays on.

4)Finally, press the ENTER key. If you do not wish to perform the RESET command, please press either the CANCEL key or press the ASSIGN push-button again.

U-CONTROL UMX490/UMX610 User Manual

Specifications

USB Connections

TypeType B; USB1.1

MIDI connections

Type5-pin DIN plug

CONTROL ELEMENTS

	Controller	1 control wheel with center reset
		1 control wheel without center reset
		8 rotary knobs
		1 fader
	Buttons	12 buttons
Keyboard
	UMX610	61 keys; velocity-sensitive
	UMX490	49 keys; velocity-sensitive

SWITCH PLUG

Foot pedal	¼" mono jack with automatic
	polarity recognition

POWER SUPPLY

USB

	Battery	3 x 1.5 Volt (Type“AA”)
	Power connector	2 mm DC jack, negative center
		9 V, 100 mA DC, regulated
		USA/Canada	120 V~, 60 Hz
		China/Korea	220 V~, 50 Hz
		UK/Australia	230 V~, 50 Hz
		Europe	230 V~, 50 Hz
		Japan	100 V~, 50–60 Hz
Powerconsumption
	UMX610	max. 0.9 W
	UMX490	max. 0.9 W

DIMENSIONS/WEIGHT

Dimensions(WxHxD)

	UMX610	approx. 8	15/32" x 3 26/32" x 38 31/32"
		(215 mm x 97 mm x 990 mm)
	UMX490	approx. 8	15/32"x 3 26/32" x 32 15/32"
		(215 mm x 97 mm x 825 mm)
Weight
	UMX610	approx. 10 11/32 lbs. (4.69 kg)
	UMX490	approx. 8	19/32 lbs. (3.90 kg)

BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.

ENGLISH