ENGLISH
2
Important Safety Instructions
* Caution
To reduce the risk of electric shock, do not remove the cover (or back). No
!!Caution
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
* Caution
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the
!!Caution
This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.
!!Caution
[1]. | Read these instructions. |
[2]. | Keep these instructions. |
[3]. | Heed all warnings. |
[4]. | Follow all instructions. |
[5]. | Do not use this apparatus near water. |
[6]. | Clean only with dry cloth. |
[7]. | Do not block any ventilation openings. Install in accordance |
| with the manufacturer’s instructions. |
[8]. | Do not install near any heat sources such as radiators, heat |
| registers, stoves, or other apparatus (including amplifiers) that |
| produce heat. |
[9]. | Do not defeat the safety purpose of the polarized or grounding- |
| type plug. A polarized plug has two blades with one wider |
| than the other. A |
| a third grounding prong. The wide blade or the third prong |
{10}. Place the power cord so that it is protected from being walked on and sharp edges. Be sure that the power cord is protected particularly at plugs, convenience receptacles and the point where it exits from the apparatus.
{11}. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
{12}. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
{13}. Only use attachments/accessories specified by the manufacturer.
{14}. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from
{15}. Unplug this apparatus during lightning storms or when unused for long periods of time.
{16}. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
1. Before you get started
1.1 Shipment
The
◊Damaged equipment should NEVER be sent directly to us. Please inform the dealer from whom you acquired the unit immediately as well as the transportation company from which you took delivery of the unit. Otherwise, all claims for replacement/repair may be rendered invalid.
◊To assure optimal protection of your UMX during transport, we recommend utilizing a carrying case.
◊Please always use the original packaging to avoid damage due to storage or shipping.
◊Never let unsupervised children play with the device or with its packaging.◊Please dispose of all packaging materials in an1.2 Initial operation and power supply
Please make sure that the unit is provided with sufficient ventilation, and never place the UMX on top of an amplifier or in the vicinity of a heater to avoid the risk of overheating.
The power supply can be realized in different ways depending on the main application area. For the installation of the UMX in a studio environment, it is possible to connect the device directly to a free USB port of the computer using the USB cable provided (see Fig. 1.1).
In case it is not possible to establish the power supply over USB (e.g. because of an overload of the host computer due to several USB devices connected), it is also possible to operate the UMX with three
3 | ENGLISH |
|
Open the battery compartment by pressing the shutter clamp carefully in the direction of the battery compartment, while pulling the cover of the compartment upwards.
Please note the following points when inserting the batteries:•The +symbol of the batteries must coincide with the +symbol of the compartment! Incorrect polarity will damage the electronics!
•Do not mix old and new batteries! When you change the batteries, always change all 3 batteries at the same time.
•Do not use damaged batteries. The UMX could be damaged due to the leakage of chemicals.
•If you do not use the unit for an extended period of time, please remove the batteries from the compartment. Here again, the batteries could leak and damage the device.
After inserting the batteries, please close the battery compartment and make sure the shutter clamp snaps into place again. If you neither want to connect the power supply over USB nor operate the device with batteries, there is yet another possibility to connect the UMX over an external power supply unit. Please observe the correct operational data (DC 9 V; 100 mA) and correct polarity of the connector plug; you will find information about this above the DC input on the rear of the unit. Reverse polarity can damage the electronics.
are provided for your safety. If the provided plug does not fit |
into your outlet, consult an electrician for replacement of the |
| obsolete outlet. |