ULTRAPAR UP1000
1. INTRODUCTION
Congratulations! With the BEHRINGER ULTRAPAR UP1000 you purchased a
1.1Before you begin
Your ULTRAPAR was carefully packed in the factory and the packaging is designed to protect the unit from rough handling. Nevertheless, we recommend that you carefully examine the packaging and its contents for any signs of physical damage, which may have occurred during transit.
+If the unit is damaged, please do not return it to BEHRINGER, but notify your dealer and the shipping company immediately, otherwise claims for damage or replacement may not be granted. Shipping claims must be made by the consignee.
1.2Mains connection
Prior to the initial operation of the spotlight UP1000, a mains plug must be attached to the power cord. Please use a commercially available shockproof plug with a minimum power rating of 2.5 A (220 / 240 V). The wires of the connecting cable are clearly marked according to their function.
The spotlight can be operated from | a | power supply of max. 120 V / 5 A or |
240 V / 2.5 A. The mains frequency must be | 50 | / 60 Hz. |
+Please note that your ULTRAPAR spotlight must be grounded properly. For your own safety, you should not remove or defeat the ground connection of the spotlight or power cord.
+Make sure that the spotlight will be installed by qualified personnel only. Proper grounding of the installer must be ensured both during and after installation of the spotlight, otherwise electrostatic discharge or similar effects might impair the performance of your UP1000.
2. HPL LAMP
Your ULTRAPAR spotlight should be equipped exclusively with recommended HPL halogen lamps made by GE Lighting: Use the models GKV 600 W/230 V (item # 35376) or 575 W/115 V (item # 47665). Make sure that the HPL lamp matches the supply voltage provided in the location in which the spotlight is operated.
+If a lamp other than those recommended by BEHRINGER is used, your ULTRAPAR may not work in compliance with CE safety standards, which will void your warranty. Additionally, this spotlight might infringe a patent.
+If the HPL lamp is operated with a voltage surpassing its nominal operating voltage, it can be damaged/destroyed or its service life reduced considerably.
1. INTRODUCTION | 3 |
